Network Interconnection Policy and Process

From WIKI - ACD.net
(Difference between revisions)
Jump to: navigation, search
(Technical Specifications for Interconnecting Secure Wide Area Networks)
Line 28: Line 28:
  
 
==Technical Specifications for Interconnecting Secure Wide Area Networks==
 
==Technical Specifications for Interconnecting Secure Wide Area Networks==
 +
Please specify:
 +
*MPLS-Provider Edge
 +
*MPLS-Ethernet
 +
*Quantity of VLANs and VLAN-ID's
 +
*Test Vlan is required, please provide the vlan ID.
 +
*List of IP subnets that ACD is expected to point to the other provider's network.
 +
 
==Technical Specifications for Internet Peering==
 
==Technical Specifications for Internet Peering==
 
==Technical Specifications for the exchange of Phone Traffic==
 
==Technical Specifications for the exchange of Phone Traffic==

Revision as of 18:26, 22 September 2011

ACD has an Network Neutrality and Open Access Policy because we believe networks are best experienced when you can connect to the most locations. ACD will interconnect with any other provider at any technically or economically feasable point.

To read our Statement on Network Neutrality and Open access, click here.

Contents

Where to Interconnect

For a list of our readily available interconnection points, click here. Central Office Interconnection Points. ACD may charge fees to interconnect at these points, dependant on location. For costs, please email sales@acd.net

General Technical Specifications

Please select the port speed desired below:

  • T1
  • Multiple T1
  • T3
    • Select either:
      • Packet over Sonet (preferred)
      • ATM
  • OC-3
    • Select either:
      • Packet over Sonet Single Mode Fiber (preferred)
      • ATM
  • Ethernet 10mb/s
    • ACD accepts a copper Cat5/Cat6 Interface
  • Ethernet 100mb/s
    • ACD accepts a copper Cat5/Cat6 Interface
  • Ethernet Gigabit
    • Select Either
      • Copper Cat6 Interface
      • Fiber Single Mode Interface LX Optics

Technical Specifications for Interconnecting Secure Wide Area Networks

Please specify:

  • MPLS-Provider Edge
  • MPLS-Ethernet
  • Quantity of VLANs and VLAN-ID's
  • Test Vlan is required, please provide the vlan ID.
  • List of IP subnets that ACD is expected to point to the other provider's network.

Technical Specifications for Internet Peering

Technical Specifications for the exchange of Phone Traffic

Personal tools
Namespaces

Variants
Actions
Navigation
Tools