Network Interconnection Policy and Process
From WIKI - ACD.net
(Difference between revisions)
Schoen.kevin (Talk | contribs) |
Schoen.kevin (Talk | contribs) (→General Technical Specifications) |
||
Line 7: | Line 7: | ||
==General Technical Specifications== | ==General Technical Specifications== | ||
− | Please select the port speed desired below: | + | ACD needs to know the port speed for Interconnection. Please select the port speed desired below: |
*T1 | *T1 | ||
*Multiple T1 | *Multiple T1 | ||
Line 25: | Line 25: | ||
**Select Either | **Select Either | ||
***Copper Cat6 Interface | ***Copper Cat6 Interface | ||
− | ***Fiber Single Mode Interface LX Optics | + | ***Fiber Single Mode Interface LX Optics |
==Technical Specifications for Interconnecting Secure Wide Area Networks== | ==Technical Specifications for Interconnecting Secure Wide Area Networks== |
Revision as of 17:28, 23 September 2011
ACD has an Network Neutrality and Open Access Policy because we believe networks are best experienced when you can connect to the most locations. ACD will interconnect with any other provider at any technically or economically feasable point.
To read our Statement on Network Neutrality and Open access, click here.
Contents |
Where to Interconnect
For a list of our readily available interconnection points, click here. Central Office Interconnection Points. ACD may charge fees to interconnect at these points, dependant on location. We may charge fees if we have to transport traffic to locations on your behalf. For costs, please email sales@acd.net
General Technical Specifications
ACD needs to know the port speed for Interconnection. Please select the port speed desired below:
- T1
- Multiple T1
- T3
- Select either:
- Packet over Sonet (preferred)
- ATM
- Select either:
- OC-3
- Select either:
- Packet over Sonet Single Mode Fiber (preferred)
- ATM
- Select either:
- Ethernet 10mb/s
- ACD accepts a copper Cat5/Cat6 Interface
- Ethernet 100mb/s
- ACD accepts a copper Cat5/Cat6 Interface
- Ethernet Gigabit
- Select Either
- Copper Cat6 Interface
- Fiber Single Mode Interface LX Optics
- Select Either
Technical Specifications for Interconnecting Secure Wide Area Networks
Please specify:
- MPLS-Provider Edge
- MPLS-Ethernet
- Quantity of VLANs and VLAN-ID's
- Test Vlan is required, please provide the vlan ID.
- List of IP subnets that ACD is expected to point to the other provider's network.
Technical Specifications for Internet Peering
- Please specify whom your current backbone providers are.
- Please specify the current capacity of your backbone.
- Please provide the IP address of your BGP servers if not directly interconnected.
- Please define IPV4 and/or IPV6 Peering.
Technical Specifications for the exchange of Phone Traffic
- Please specify your OCN
- Please specify your phone switch type and brand.
- Please specify if you want IP interconnection or TDM interconnection.