Ping Validation Testing from a Cisco IOS Router
Related Articles to Read
Ping testing is a fundamental basis of troubleshooting ip network testing. Pings allow detection of lost packets and can help determine if there are errors or help in Debugging Ethernet Port Duplex and Speed Settings. Sending a series of pings simulates traffic flow over a network interface, and as traffic goes over an interface potential errors can be detected.
ALL TROUBLESHOOTING AND DEBUGGING OF CONNECTIONS SHOULD START AND FINISH WITH PING TESTING.
Ping testing over short periods of time will not invoke a problem with a customer voice traffic, as ping has a lower priority than VOIP QOS traffic.
Ping testing generally does not negatively affect current operations of the customers connection, however the pinging will use some of the bandwidth.
Ping is the lowest form of packet, therefore if pings go through with no reliability issues, the other traffic is likely to have no reliability problems.
Ping testing can located instances of latency that could help in finding QOS issues on a customer link that are underlying in the network layer.